新闻详情
Home > news > Content

What is the difference between the material and processing method of ordinary street light poles and high pole lights?

Edit:Xingtai Lighting Group Co., Ltd.UpDate:2019-05-12

1. The material of the lamppost is made of high-quality low-carbon steel Q235A. The silicon content of the steel is not higher than 0.04%. After bending by a large bending machine, the straightness error is less than 0.05%, and the wind resistance of the lamppost is 36.9 meters. / Second design above 11th, the seismic intensity is 8th.

2. The total height of the rod body is X meters, the upper diameter is Xmm, the lower diameter is Xmm, and the wall thickness is Xmm. The bottom of the pole is equipped with a flange. The mounting distance of the flange is ØX, which is installed on the foundation by anchor bolts. (X is the parameter set by the user, or is configured by the company as usual)

3. The welding method of high pole lamp is automatic submerged arc welding, the welding is reliable, the surface is smooth, there are no obvious welding defects such as pores, welding tumors, undercuts, ultrasonic flaw detection, and the requirements of welding GBl1345II standard.

4. The anti-corrosion treatment of street lamp pole adopts internal and external hot-dip galvanizing. The process of galvanizing is subjected to pickling, hot-dip galvanizing, water washing, phosphating, passivation, etc. The surface of the galvanized layer is smooth and beautiful, the gloss of the high pole lamp is uniform, and there is no wrinkle skin. , falling and zinc, skin, spots, yin and yang surface defects, zinc layer thickness of 86um or more, in line with national standards GB/T13912-92, galvanized layer adhesion meets the requirements of GB2694-88, anti-corrosion life is greater than 30 year.

5. After the hot-dip galvanizing of the lamppost, electrostatic spraying (color selection), sanding before spraying to increase the adhesion, strictly control the curing time and temperature during the spraying process, to ensure that the plastic layer is uniform, smooth and free of pores. The thickness of the sprayed layer is ≥1Ooum, the adhesion is up to GB9286-880, the surface is smooth, and the hardness of the high rod lamp is ≥2H.

6, high pole lights green and environmentally friendly. Contains no harmful elements such as mercury and lead, which is beneficial for recycling and utilization, and does not cause electromagnetic interference. Common lamps contain harmful elements such as mercury and lead, and electronic ballasts in energy-saving lamps can cause electromagnetic interference.

7, protect eyesight. Driven by DC power supply, no stroboscopic, ordinary lights are AC drive, it will inevitably produce stroboscopic adverse effects on long-term eyes. Eight, high light efficiency, low heat. 90% of electrical energy is converted into visible light. Only 20% of ordinary incandescent light is converted into visible light, and 80% of electrical energy is converted into heat. This is a great waste for limited resources.

8. High safety factor. The required voltage and current are small, the heat is less, and there is no safety hazard.

9. High pole lights are suitable for places: highways, overpasses, parking lots, stadiums, freight yards, ports, airports and public leisure plazas.