新闻详情
Home > news > Content

The most practical solar LED Street lamp controller installation and debugging method

Edit:Xingtai Lighting Group Co., Ltd.UpDate:2019-04-07

Solar LED Street LampIn the working system not only the battery board, solar energy battery and so on play an important role, the quality of the solar Controller also determinesSolar LED Street LampThe stability of the system. In the application of solar street lamps, the controller can intelligently adjust the power. Adjustable power can control the brightness of LED lights, such as the early morning street lights adjusted to 30W, late night adjustment into 15W Energy saving, which not only meet the lighting needs of the night, but also save the battery, solar panel overall configuration and budget, but also can greatly and effectively extend the life of LED lamps.

Solar LED Street LampController installation and Debugging method

Controller installation Setup Method:

Press the key to continue more than 3s digital tube began to blink, the system into the adjustment mode, release the button, each press the button, digital tube number will change a number, until the digital tube display of the number on the user from the table selected mode corresponding to the number, such as the digital tube stop flashing or press the button again more than 3s to complete the setup.

Pattern Introduction

Pure Light Control: when there is no sunlight, the light intensity drops to the starting point, the controller delay 10 minutes to confirm the start signal, according to the setting parameters to open the load, the load began to work, when there is sunlight, the controller delay 10 minutes to confirm the shutdown signal after shutting down the output, the load stopped working.

Normal mode: The upper power load remains in the output state, which is suitable for loads that require 24 hours of power supply.

For models with 12V/24V automatic recognition function, when the controller first power up, the system will be voltage identification, when the digital tube display "0", indicating the 12V system, if the display "1" indicates the 24V system. At the same time, the system has short circuit, overload, and unique anti-reverse protection, full, automatic shutdown, recovery and other full-featured protection measures, detailed charging instructions, battery status, load and a variety of fault instructions.

Working status indication

A, the Battery board indication: When the solar panel output voltage reaches a certain value,Solar LED Street LampThe battery indicator light is long, the solar panel indicator light flashes when the battery is started charging, and the indicator light flashes when the system is overpressure.

B, battery instructions: When the battery is not pressed when the battery indicator light flash, when the battery is too fast, the battery light flash, while shutting down the load, the battery status is normal, the battery indicator light is long.

C, load indication: When the load is working properly, the load indicator light is long, when the load is over, the load indicator flashes slowly, when the current exceeds the rated current 1.25 times times continuous 30s, or the current exceeds the rated current 1.5 times times continuous 5s, the controller will shut down the load, the controller immediately shut down the load when the load is short